Automotive Cables to ISO, SAEJ, JASO D Automotive Cables. APPLICATIONS OVERVIEW. Standard wall automotive cables are ideal for use in. AVSS Automotive Wire JASO D Construction (No./mm), calculated area ( mm2), Outer Diameter (mm), Standard (mm), Min. (mm), Standard (mm), Max. AVSS Japanese Standard Automotive Cable Conductor:Cu-ETP1 bare according to JIS Insulation:PVC Standard Compliance:JASO D
|Published (Last):||22 February 2010|
|PDF File Size:||10.10 Mb|
|ePub File Size:||2.47 Mb|
|Price:||Free* [*Free Regsitration Required]|
Scope All previous automotive low-voltage cable standards JIS C established inwhich was the first standard for this subject in Japan, JASO D established in in which the insulation covering was made thinner, and D established in were created without concern about the rated voltage of the cables because the cables were applied to automotive electric systems with the international standard of 12 V and 24 V, and have been used continuously.
The types and symbols are summarized and described in Table 1. Extremely thin wall type cross-linked polyethylene insulated heat resistant low-voltage cables for automobiles Note 2: Therefore, in this revision, standards for rated voltage of 25 VAC and 60 VDC are provided mainly for cables with thin insulation covering specified by JASO according to the international standard.
Thin wall low-voltage cables “type 1” for automobiles 0. Their adoption must be considered in a future revision. Matters related to patent rights This standard includes no matters related to patent jask. In addition, the cables conforming to ISO in this revision are as follows: The English name was also changed from “Low-tension cables with thin wall insulation for automobiles” to “Unscreened low-voltage cable.
The conductor shall not be exposed in the winding test in 6. Construction and material 5. Compressed conductor extremely thin wall halogen-free insulated low-voltage cables for automobiles CAVUS: Conductor Calculated Nominal Number of Approx.
Conductor Number of Sttandard Nominal Approx. When marking is applied on the cable surface to identify the type and nominal size of a cable, it shall not be easily erasable.
Wire Cable, Jaso D611 Standards Avss Type Automotive Wire PVC Insulation, Wire Harness
The heat resistance B test shall be conducted in accordance with the method specified in 5. Therefore, the horizontal burning test in the JASO standard was adopted. The tests requiring different performance depending on the nominal size are described in Table stadnard to These types and symbols must be organized and integrated in accordance with ISO standards in order to increase international competitiveness in the future.
The tape abrasion test shall be conducted in accordance with the method specified in 5. Among the heat resistance tests of the ISO standard, the short-term test jso overload test were not adopted. For this reason, further reviews sstandard be conducted jasso investigate them at every opportunity.
Product designation Product designation is based on the applicable standard name, type, nominal size, and colour, or by means of symbol, nominal size, and colour code. After study by the Electrical and Electronic Equipment Subcommittee and the Standardization Board, the revision was approved and determined at the standardization meeting in March All matters such as the testing method and testing jig shall be handled as common knowledge.
Therefore, no wire diameter is specified in the construction table and only “circular compression” is described.
AVSS – Japanese Standard Automotive Cable
The insulation ator shall not be fractured in the voltage resistance test in 6. Outline and background of revision 1. As required, the most recently updated version of the applicable standard including addenda shall be applied. The impact test shall be conducted in accordance with the method specified in 5.
The insulation shall neither crack nor melt after being heated. Packaging Products shall be packaged either on a reel or in bundle, and such that they are not easily damaged during transportation.
The insulation shall not be fractured when the specified voltage is applied. Details of specified items in specified elements 5. In addition, the performance with different nominal sizes shall be as specified in Tables 8 to Maximum shrinkage length on the both ends shall be 2 mm after being heated as specified. Conductor Calculated Nominal Approx. Therefore, cables of different classes cannot be integrated simply as a single type, and are used separately.
The scrape abrasion test shall be conducted in accordance with the method specified in 5. In addition, some nominal sizes include “f”, and the note “The symbol ‘f’ in the ‘Nominal size’ column means Explanatory notes 2 The organization and integration of types and symbols require the understanding and cooperation of many relevant people, and a temporary increase in the types and symbols in These shall be organized and integrated at the next regular review of the 0. The idea was not adopted because those indications are not made worldwide and because of a problem related to manufacturing equipment difficulty of application to extremely thin cables.
Inthe standard was revised to include these cables. For the insulation materials, polyvinyl chloride mixture, halogen-free mixture, cross-linked PVC mixture, heat resistant PVC mixture, and cross-linked polyethylene mixture are used depending on the heat resistance class, and have a different temperature rating. Compressed conductor ultra thin wall halogen-free insulated low-voltage cables for automobiles EB: The meanings of the symbols for cable types are as follows.
This test is applicable to the nominal sizes of 5 or less. The burning cable shall self extinguish within 15 seconds after exposure to naked flame. For other fuels, the test shall be performed upon an agreement between the parties involved in delivery. Marking The following items shall be marked on the packaged products using indelible ink.
Test method detail item 6. The identification mark shall be readable after the specified test. The construction shall conform to the applicable standard in Tables 11 to 25 when the test is conducted according to Item 6.
Maximum shrinkage length on both ends shall be 2 mm after being heated as specified.